

EASYBEAT
MODEL 26
Spot Welder & Dent Pulling System
- 4 Cables with compress air cooled cable
- Single side spot welding gun
- Light weight pneumatic sided spot hand gun, squeezing adjustable pressor of 350Kpa
- Cable support for ease of use
- Double spot and single spot switch (no cable changing is required)
- 2.4M Cable for single and double spot
- Copper arms for maximum current flow and durability
- Adjustable arm speed closing
- Quick release chuck system for arm removals
- Easy to use power and time control
- Push button mode controller
- Air regulator for welding squeeze pressor
- Dual weld control switch, either squeeze and weld in one action or just squeeze to
- allow for positioning, if position of spot is correct press weld button
- Locking caster front wheels
- Three storage compartments, above and below in cabinet
- Optional plasma or mig welder
Technical Features:
Main voltage
Nominal power at 50% duty cycle
Maximum welding power
Short circuit secondary current
Welding current on steel 1+1 mm
Thermal class
Protection degree
Secondary thermal current at 100%
Secondary no load alternate voltage
Fuses
Delayed fuses
Magneto thermal switch
Aerial noise produced
Vibrations
Main voltage
Nominal power at 50% duty cycle
Maximum welding power
Short circuit secondary current
Welding current on steel 1+1 mm
Thermal class
Protection degree
Secondary thermal current at 100%
Secondary no load alternate voltage
Fuses
Delayed fuses
Magneto thermal switch
Aerial noise produced
Vibrations
415V 50Hz
20kVA
50kVA
9.5kVA
8.5kA
F
21lP
0.88kA
8.0V
35A
25A
40A
<70 dB (A)
6.5 mms2




